ART Prosplit

30

Microphone Splitter

  • 1 Channel
  • 1 Direct and 1 transformer-isolated output
  • Phantom power is fed to the microphone via the Direct Out
  • Ground lift
  • PAD switch per input
Disponível desde Setembro 2008
número de artigo 217485
unidade de venda 1 peça(s)
Number Of Channels 1
Inputs 1
Outputs Per Channel 2
+48 V Phantom power No
Grd Lift Switch Yes
Pad Switch Yes
Headphone Outputs No
Design Desktop
€ 80
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Segunda, 3.06. e Terça, 4.06.
1

30 Avaliações de clientes

4.8 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

som

acabamento

19 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
T
gets the job done
Tanj 30.06.2020
I use this for mid & sides recording in the studio & it does the job just fine. Audio quality didn't seem to be affected, phantom power passes through it OK, tried it with both condenser & ribbon valve mic, it's small, unobtrusive but well-built & I'm sure will last for years. The pad is a neat feature for splitting line-level signals, though I haven't tried this yet. Good product!
som
manuseio
características
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
A reliable splitter
Anónimo 21.11.2016
Good sound... of course a little less crystal clear than my Radial pro ms2, but less than half the price too! I'd like to see a phase reverse switch, would be handy in some cases....
som
manuseio
características
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
BF
zum Testen mit kleinem Verlust
Beatz Factory 20.04.2010
Ich habe mir ART Pro Split zugelegt, um in einer Studio/Aufnahmesituation mit einem Mikrophon verschiedene Preamps mit dem gleichen Audio-Signal testen zu können. Für diesen Zweck leistet das kleine Gerät sehr gute Leistung und möchte nicht mehr gemißt werden.

Das Solide Design des Gerätes macht einen sehr vertrauenswürdigen Eindruck und verspricht einiges auszuhalten. Mit dem Ground Lift Schalter läßt sich die 48Volt Phantomspeisung von einem der Preamps ohne Probleme an das Mikrophon weiterleiten, während das gesplittete Signal ohne Phantomspeisung in meinem Fall vom Mikrophon an den anderen Preamp geschickt wird.
Man sollte sich allerdings klar darüber sein das mit dem Splitten eines Signals auch Qualitätsverluste des Audiosignals einher geht. Auf der Verpackung des Gerätes wird darauf hingewiesen, auf einen Voltage Insertion Loss von ungefähr 2dB bei 1K Hz hingewiesen.

Ich halte das Gerät auch wegen seines robusten Designs daher besonders geeignet für den Bühnenbereich oder für das Testen, verschiedenen Geräten mit gleichem Eingangsignal im Studio wobei noch vom Qualitätsverlust abgesehen werden kann.
som
manuseio
características
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate fr
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
R
Très pratique !
Raphaël5044 19.09.2020
Je l'utilise pour de l'enregistrement live en studio de répétition...
Le signal du micro est splité pour aller d'un côté dans la table de mixage de la salle , et de l'autre côté vers le patch de la régie (pour l'enregistrement).
Signal impeccable à l'enregistrement, pas de souffle, pas de bruit, fait très bien le travail !
som
manuseio
características
acabamento
0
0
Reportar a crítica

Reportar a crítica