String Swing CC01K Guitar Wall Hanger ASH

8

Soporte de pared para guitarra

  • Placa de montaje de madera de fresno
  • Diseño envolvente del arco que evita que la guitarra se pueda colgar en posición incorrecta en el arco
  • Para retirar la guitarra hay que elevarla unos 5 cm aproximadamente
  • Las palas asimétricas de bajos, guitarras acústicas y eléctricas se sujetan perfectamente y cuelgan también en posición recta
  • Idóneo para anchuras de cuello de hasta 47,5 mm
  • Apto para todos los nitrolacados excepto el blanco
  • Made in USA

Nota: En los lacados de nitrocelulosa y con una presión prolongada se pueden producir marcas en forma de manchas incluso sin reacción química. Nosotros recomendamos una funda o caja de transporte adecuada para un largo almacenaje

Disponible desde Mayo 2021
número de artículo 518959
Precio por 1 Unidad(es)
Tipo Soporte de pared
Apto para Guitarra acústica, bajo eléctrico, guitarra eléctrica
Para guitarras con nitrolacado
18,40 €
IVA incluido. 15 € de gastos de envío adicionales
En stock
En stock

Este producto está en stock y puede ser enviado inmediatamente.

Información sobre envíos
Entrega estimada entre Lunes, 3.06. y Miércoles, 5.06.
1

8 Valoraciones de los clientes

4 / 5

Para poder evaluar un producto deber estar registrado en su centro de clientes.

Importante: Con fin de evitar evaluaciones en base a rumores o mitos populares, solo permitimos en nuestro website evaluaciones por clientes que hayan comprado el producto con nosotros.

Tras de acceder a su centro de clientes encuentra en Centro de clientes "Evaluar productos" todos los artículos que puede evaluar.

Estabilidad

Fabricación

7 Reseñas

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
GB
Sticky plastic that rips off
Grumpy Bassman 01.03.2024
I got several of those as I thought, it's the best wall hanger. Made in US, highly reputable, etc.

When I took the first out of the box, I was surprised, the hanging surface was covered in sticky plastic that peels off. I rub my finger and it's now covered in plastic that seems to be cleanable, but nevertheless. I didn't try this hanger my instruments with beautiful unfinished necks and decided to try a laquer-finished neck first. Yeah, it hangs, but when I take the guitar off, I need to clean it, as it takes the dissolving plastic from the hanger.

I decided not to risk my instruments and didn't install those hangers.

Another thing a buyer needs to be aware of that the hook is really narrow, so you need to be very careful while hanging an instrument. When I'm dropping the instrument without looking much (like I do on Gator or K&M), this doesn't work and I hit the hook with the neck, as the hook is much narrower. It's barely enough to tightly fit my 6-string guitar with a 43mm nut, a wider neck on an extended range bass might be a total no-go.
Fabricación
Estabilidad
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
T
Tedddd 10.11.2022
Best feckin hanger I have
Fabricación
Estabilidad
0
0
Reportar evaluación

Reportar evaluación

google translate de
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
MK
Ewas schöner als "Plastik" - ein paar unbedeutende Schwächen
Martin K. 15.12.2021
Suchte mal was anderes als die schwarzen Wall hanger-
-sollte ausserdem Nitro Lack beschichtete Gitarren nicht angreifen
-die String Swing sehen gut aus, haben angeblich ein Gummi, das Nitro nicht angreift
-Verarbeitung schön, sieht deutlich besser als der Standard aus.
-Hat doch einige Teile, insbesondere der O Ring ist wohl kein Langzeit Teil, das bleibt abzuwarten. Soll wohl die Torsion der Gabel ermöglichen. Hier wäre ein Kunststoff Ring aus Nylon besser gewesen. kein Verschleiss.
-Schwäche ist die Verschraubung der Gabel, hier dreht man, falls die Wand "schön" ist, ohne es zu wissen die Halte Schraube der Gabel durch das Holzstück eventuell zu weit und die bohrt sich dann etwas in die Wand. Unschön, wenn das Ding jemals wieder abmontiert würde.
-das mit dem ungewollten durchschauben stört mich, deswegen ein Punkt Abzug. Statt dem Kunststoff Distanz Stück hätte man ein massives Holzstück nehmen können mit einer Präzisonsbohrung, ist wohl bei der Herstellung zu teuer. Wäre aber "etwas schicker und noch Umwelt schonender , haha....."
-Verpackung etwas zu viel Kunststoff, Teile fallen einem entgegen nach dem Öffnen. Schachtel hätte doch gereicht. Aus Pappe natürlich.
Fabricación
Estabilidad
3
1
Reportar evaluación

Reportar evaluación

google translate fr
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
R
Bon produit
Richy14 16.08.2021
Solide, efficace (tient bien au mur pour le moment), polissage perfectible sur les arêtes.
Fabricación
Estabilidad
0
0
Reportar evaluación

Reportar evaluación

Relacionados de YouTube