Mooer Pedal Controller L6 MKII

9

Programmable 6-Channel Loop Switcher For Effect Pedals

  • The footswitches provide control over six independent loops and a separate tuner output
  • Extremely simple and intuitive programming
  • 36 Freely configurable presets, 6 banks, 6 presets per bank
  • 2 Selectable switching modes: Play mode, live mode
  • Switchable pre- and post-position buffer prevents signal loss
  • Built-in tuner
  • True bypass / buffered bypass (switchable)
  • 7 Footswitches
  • 4 Push-button switches for programming presets and switching buffers
  • Status LEDs
  • Inputs / outputs: 6.3 mm mono jack
  • Power supply via 9 V DC mains adapter (2.1 mm x 5.5 mm barrel connector, polarity (-) inside)
  • Current consumption: max. 300 mA
  • Metal housing
  • Dimensions (L x W x H): 97 x 370 x 54 mm
  • Weight: 1.15 kg
  • Incl. power supply unit

Note: Battery operation not supported.

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Aviso Register your purchase at www.w-distribution.de/en/Warranty for an extended warranty of 4 years.
Disponível desde Setembro 2021
número de artigo 520004
unidade de venda 1 peça(s)
Type Looper/Switcher
LED Display Yes
PSU Connector Yes
Shape Desktop
MIDI Interface No
€ 140
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Segunda, 29.04.
1

9 Avaliações de clientes

3.9 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

características

acabamento

8 Críticas

c
Um canivete suiço
cmendes 25.10.2022
Um aparelho versátil e bem construído que oferece opções que extrapolam claramente a sua gama de preço, como por exemplo os Buffers de entrada e de saída, que podem ser accionados independentemente.
Nesta gama de preço é seguramente o produto com melhor relação opções vs valor.
Pontos menos positivos - As ligações para os jack serem em plástico - parecem um pouco frágeis; Por vezes podemos inadvertidamente pisar o botão de mute quanto tentamos accionar os dois switches mais à direita; por vezes podemos inadvertidamente pisar dois switches e sem querer accionar o banco acima ou abaixo, o que pode ser constrangedor numa actuação ao vivo.
Apesar destes pontos menos positivos, a construção é muito boa e não compromete. Sónicamente cumpre também.
É muito fácil programar (nem li o manual) e não ocupa muito espaço na pedalboard.
Pessoalmente gostaria que a numeração dos switches fosse invertida para respeitar a ordem dos pedais - o numero '1' à direita e não à esquerda.
Recomendo para qualquer aplicação (live & estúdio).
características
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
SP
Crazy value for the money!
Stuart P 02.03.2022
My search for a loop switcher began when I wanted to have the ability to instantly switch from a clean signal (reverb, delay, and phaser) to a dirty signal that was just two stacked drives. I originally achieved this with a Boss LS-2, but then I quickly found myself wanting more flexibility.

The L6 does this and more, of course. Comparing to something such as the Boss ES-5, this had all the same features I needed at a much better price point. I don't have the need for midi switching or advanced routing options at this point, nor will I in the near future. The buffers were impressive and I could instantly hear the difference, although being a buffer snob, I opted to use my Tuner with built-in Bonafide Buffer on the input, and the Mooer's buffer just for the output. My one complaint with the buffer system is that it isn't programmable with the channels and it seems that I have to turn it on every time I plug in my pedal board. Not a huge task as there's easy access buttons right on the unit, but sometimes I forget and wonder why my tone is so thin for 10 minutes. With both buffers off, it is true bypass.

Saving presets is a breeze, and unlike the previous gen (from what I've heard) the unit does not drop out at all when switching between them. There is a micro delay from when you hit the switch until it changes, but your audio is going through the whole time, and it's fractions of a second. The unit itself feels very solid, the LED display is the perfect brightness for me, not blinding bright, but bright enough to see in direct overhead lights. There is enough room between each loops jacks to use pancake cable ends.

Overall, I was very impressed with it, time will tell on the durability of the switches/jacks but I am not concerned at this point. I have not had my first gig back yet since covid, but I've been using it at practices for months now, at least twice a week. Highly recommended for a somewhat "bare bones" switcher.
características
acabamento
4
1
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
H
Macht was er verspricht und das ganz gut.
HartmutV 16.01.2022
Diesen Loop Switcher habe ich als (kostenlosen) Ersatz für den defekten Vorgänger (Mooer Pedal Controller Loop 6) im Austausch von Thomann erhalten. Den Vorgänger hatte ich mir ausgesucht, da er mit den 6 Loops genau das zu Verfügung stellt, was ich vor dem Amp brauche. Alles andere läuft bei mir über stereo FX im zweikanaligen Amp.
Die Farbe des Nachfolgers ist nicht wirklich mein Geschmack, was mir aber nicht so wichtig ist. Der Nachfolger ist praktisch identisch mit der Bauform und dem Aufbau (Loop Verkabelung) des Vorgängers, so dass ich meine Tretminen und Verkabelungen auf dem Effektboard nicht umhuddeln musste, was mir wichtiger war. Auch der Funktionsumfang ist bis auf die handbeschriftbaren, beleuchteten Display-Panels für die Loops, die beim Nachfolger fehlen, identisch.

Der Loop Switcher hat ein stabiles Metallgehäuse. Die Bedienung und den Umfang finde ich super; alles da, was ich im Alltag brauche. Programmierung geht super easy, schnell und sicher. Da kann man auch mal schnell was ändern, ohne Angst haben zu müssen, sich in den Tiefen irgendwelcher Menüs und Knopfologien zu verirren und in Hektik zu geraten. Auch die zwei Modi "Live" und "Play" sind mir wichtig, weil ich nicht immer nur auf programmierte Loops zugreifen möchte, wenn ich z.B. am Austüfteln bin. Nervig ist nur, dass man beim Einschalten immer bei den programmierten Modi landet und wohl nicht konfigurieren kann, womit der Loop Switcher standardmäßig starten soll. Allerdings muss nur einmal der Live/Back Taster gedrückt werden, um den Live-Modus zu aktivieren. B- und F-Buffer sind vorhanden und funktionieren. Bei mir hilft‘s bei Verwendung von Fuzz hinter dem Wah.
Der Klang ist insgesamt i.O. Ich konnte keine wirklich, deutlich wahrnehmbaren Änderungen mit Loop Switcher vor dem Amp feststellen - alle Loops im Bypass - beim Vergleich mit der Gitarre direkt in den Amp. Vielleicht werden die Höhen einen winzigen Hauch beschnitten, vielleicht ist das aber auch nur Voodoo. Mute Taster und Tuner funktionieren. Regelmäßig brauche ich aber nur den Mute Taster. Die Güte des Tuners habe ich mir nicht angeschaut. Die Loop/Mute Taster sind von normaler Qualität. Die mechanischen Klick-Geräusche der Taster beim Umschalten gehen in Ordnung und das Schaltgefühl ist gut. Allerdings vernehme ich einen „Schalt-Plopp“ im Amp. Irgendwie wird dort ein Störsignal aufmoduliert und übertragen. Nichts wirklich Dramatisches, da es beim Spielen untergeht, aber hörbar, wenn die Gitarre still ist.
Der Abstand der Loop Taster geht meiner Meinung nach ebenfalls in Ordnung. Zwischen zwei Tastern ist dieser 6.2 cm. Man hat also 12.4 cm Platz zum "Treffen" eines Tasters und erreicht auch gut zwei Taster gleichzeitig (Bank-Umschaltung für programmierte Loop Presets, Tuner). Bei mir mit Schuhgröße 43 alles passend. Gut finde ich auch, dass es praktisch nicht möglich ist, die anderen Minitaster (Programmierung, Mode-Umschalter, Buffer-Aktivierung) versehentlich zu betätigen mit den Füßen.
Man beachte vielleicht noch die nicht unerhebliche Stromaufnahme von 300 mA bei 9 V, falls man den Loop Switcher an die Board-Versorgung hängen will (für den separaten Anschluss gibt es ein mitgeliefertes Netzteil).

Meiner Meinung nach absolut brauchbar für den Privatbereich oder einen „Gig im Bierzelt“. Nach vier Wochen Einsatz ohne jedes Problem liegen bei mir aber noch keine Langzeiterfahrungen zur Haltbarkeit etc. vor. Den Punktabzug gibt es für den „Schalt-Plopp“ im Amp.
características
acabamento
1
0
Reportar a crítica

Reportar a crítica