Petz Kevlar Tailgut Double Bass

25

Kevlar Double Bass Tailgut

  • High-strength tailgut from 12-plait Kevlar
  • Only 1% strain
  • Length: 70 cm
  • Diameter: 4 mm
  • Maximum load: 1050 kg
Produkt dostępny od Lipiec 2015
Numer artykułu 368036
Jednostka sprzedaży 1 szt.
41 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 24.05.
1

25 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

wykończenie

16 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Great No Brainer Buy!
Thonk 04.01.2020
Right, I'm a pro musician of 30years.

E Bass, Double Bass, Guitar.

I recently had one of my double basses needing a neck repair and picked up a new tailpiece while procrastinating about doing it.

I picked up this tailgut on a whim during a Thomann shop to go with the tailpiece.

So - a lovely little buy!
Really nice, easy to tie (look it up on line, it's an absolute doddle!)
Zero stretch, really stable.
It is also easy to adjust, which I had to do initially to get the right length I wanted.

It's not wire which I love!

Sound -
This went on a 1940's Cech solid body swell back 3/4 Bass.
I'm not the type of guy to say that the sound of this bass was massively changed by this, but it's so much nicer to have this on it than a piece of steel wire!

Con's - None

I picked up a small one for a violin for a fiddle player I know and he loves his, I'll be swooping the tailgut over on my other double bass as a result.

Highly recommended.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Works when it has settled
Tobben00 22.05.2024
It was a simple task to fix the rope to the endpin, but the kevlar material stretches ALOT when tension is applied to the strings. This resulted in me untying and retying the rope three times before it finally settled. Now it is stable and there is no resonance or noise when the double bass is played.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
A
Echt cooles teil!!!!!
Anonimowy 11.02.2016
Hallo liebe Double Bäder !!!
Ich habe mich über Google informiert über tailgurte ,sprich Schwingungen und Belastbarkeit und habe mich für den Pete tailgut entschieden da er All das erfüllt wonach ich suchte sprich Schwingung und Belastbarkeit habe mir das gute Ding gleich vom Thomann Werk montieren lassen da ich auch gleich den Thomann 3/4 E S N Double Bass gleich mit bestellt habe kann den Bass nur empfehlen .nun der Pete tailgurte ist sehr zu empfehlen da er all das erfüllt was ein tailgurte erfüllen bzw leisten soll .
Und der Preis ist ja auch mehr als top also klare Empfehlung. .
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate fr
Wystąpił błąd. Proszę spróbować później.
M
Michel7117 11.11.2020
Sur ma contrebasse Thomann 111BR 3/4, tout est d'origine. Je n'ai rien changé depuis que je l'ai. L'autre jour, le lien du cordier a cédé brutalement sans raison apparente. J'ai essayé deux liens, en acier et en kevlar. Mais ce produit synthétique n'est pas réglable. J'ai trouvé l'autre plus pratique. Musicalement, il n'y a pas de différence.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie