One Control True Bypass Looper

27

Looper for Effects Pedals

  • Can be used as an A / B box or mute switch
  • True bypass
  • Bypass foot switch
  • Status LED
  • 6.3 mm Mono jack input / output
  • 6.3 mm Mono jack send / return
  • Power supply via optional 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
  • Passive operation without power supply possible (status LED without function)
  • Current consumption 1 mA
  • Metal housing
  • Dimensions (L x W x H): 101 x 53 x 49 mm
  • Weight: 127 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

Nota bene Registra il tuo acquisto presso www.w-distribution.de/en/Warranty per una estensione di garanzia a 4 anni.
In catalogo dal Agosto 2020
Numero di articolo 501264
Unità incluse 1 Pezzo
Type A/B, Looper
LED Display Yes
PSU Connector Yes
Shape Floor Effects Pedal
MIDI Interface No
€ 49
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

27 Valutazioni dei clienti

4.9 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Caratteristiche

Qualità

14 Recensioni

e
Ottimo
end117 22.12.2022
Lo utilizzo per aggiungere un true bypass ad un piccolo multieffetto che non ne è dotato è che uso in piccoli spezzoni di qualche brano.
Perfetto.
Caratteristiche
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
DH
Simple and very effective
Des Hickey 06.01.2023
I have a pretty simple pedal chain:

Bass -> tunner -> compression -> octaver -> distortion -> amp

I noticed that even when the distortion was disabled there was significant noise, despite it being a reasonably good quality pedal. I used the one control true bypass looper to isolate the distortion pedal and now it’s sooooo quiet. Additionally this pedal allows more flexibility with when physically positioning pedals in your board. Love this pedal
Caratteristiche
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
Z
Noisy
Zafos 10.03.2021
Audible click when pressed and noisy when engaged
Caratteristiche
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate de
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
K
Tut genau, was er soll ...
KarstenP 22.11.2020
Empfehlenswert!
Wird bei mir benutzt, um einen Octaver nebst vorgeschaltetem Verzerrer für ein kurzes Solo in den Signalweg zu schalten. Funktioniert bestens.

Der Looper ist trotz seiner geringen Abmessungen nicht klapperig, sondern wertig verarbeitet und kann aufgrund seines soliden Gewichts auch ohne zusätzliche Fixierung auf dem Boden stehen. Allerdings habe ich den ganzen Salat auf einem kleinen Pedalboard aufgebaut, damit nicht alles in der Gegend herumfliegt. Ist auch schöner für die Netzversorgung.

Der Schalter hat keinen hör- und fühlbaren Druckpunkt. Das kann man mögen oder nicht; vermeidet allerdings beim Schalten ein mehr oder weniger lautes und vielleicht auch störendes Klickgeräusch, wenn's auf der Bühne mal stiller ist.

Das Teil läuft generell ohne Strom; mit Strom (nur per Netzteil) ist aber schöner, weil dann die Satus-LED in Funktion ist und Mensch immer weiß, was gerade Sache ist.
Caratteristiche
Qualità
1
0
Segnala un abuso

Segnala un abuso