Schaller STM TOM-Style Bridge N

71

Bridge for Electric Guitar

  • Suitable for bolt spacings from 74.0 - 74.5 mm
  • Non-reverse model: intonation screws point towards the pickup
  • Adjustable in height, intonation and string spacing
  • Low-friction roller saddles for excellent tuning stability
  • Perfect for tremolo guitars
  • Wide flat roller notches for low strings and deep U-shaped notches for high strings
  • Brass saddles
  • Single string spacing: 9.7 - 11.5 mm
  • Total string spacing: 48.5 - 57.5 mm
  • Dimensions: (L x W x H) 83.8 x 18.1 x 12.5 mm
  • Total drill hole distance: 74 - 74.5 mm
  • Weight: 58 g
  • Schaller no.: 12080100.11
  • Finish: Nickel
  • Includes 2 impact sleeves M7 and 2 height adjustment screws M5 (metric)
  • Made in Germany
Tillgänglig sedan Juni 2005
Artikelnummer 179980
försäljningsenhet 1 Styck
Colour Nickel
Design Tune-O-Matic
Single Rider Yes
String Holder No
699 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Beräknat utskeppningsdatum till Tisdag, 30.04.
1

71 Kundbetyg

4.5 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

40 Recensioner

N
Rullsadlarnas RR!
Naulen 13.11.2021
Fungerar utmärkt. En stjärna avdragen för att det inte följer med M8 adapter.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

S
Väldigt bra!
Squid 11.08.2019
Jag bytte till denna bryggan på min Flying V eftersom att jag hade stämmproblem och det hjälpte med den här och jag tyckte att tonen som jag fick från gitarren lät mycket bättre med mer sustain.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
V
The bridge is good, but pay attention to compatibility issues
Valkus 03.12.2019
Here is my experience:
I was changing the bridge for a Japanese copy of Gibson Les Paul of 1978.
Though I measured the existing bridge, I didn't disassemble the guitar to measure if holes for existing bushings match the diameter of bushings for this bridge and of course it didn't.

The original holes were much bigger. Anyway, to extract existing bushings I had to drill out the bolts and once that was done, the only solution was to make the new threading in the existing bushings. Fortunately I had the tools and the problem was solved.
In summary: I used old bushing making new threading in them, then i screwed in the bridge support and put the new bridge on top.
The rest (tuning the distance between strings, bridge height etc) was easy.

Good product, but check compatibility
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
h
Excellent w/ Dusenberg Les Trem II
hennyflec 13.09.2020
Put one of these on my LP Studio with a Dusenberg Les Trem II, perfect! (Also installed some locking tuners.) Transformed the guitar in such a beautiful way!

Such a smooth action to the tremolo arm, feels perfect tbh, I think the roller saddles help hugely (bought them together as loads of people recommend)

I feel like the guitar resonates differently with this whole upgrade and security of the string travel etc loool, also how the les trem is flat on the body... The LP is chambered too, w/ the trem it really has a slight hollow body/ jazz guitar feel, especially with the baseball bat neck ha ha ha
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension