ABM 2500n-RE Bridge

39

Tune-o-matic-style bridge for electric guitar

  • Classic ABR-1 replacement
  • Perfect for the Les Pauls of the 50s and 60s
  • String spacing: 52 mm
  • Bolt spacing: 73.81 mm
  • UNC 6/32 (3.505 mm) bolts
  • Radius: 12"
  • Built from solid bell brass
  • Colour: Nickel
  • Incl. bolts with knurled screw, replacement saddle, replacement snap ring, spare screw and Protector-Box

Note: Please note that the bridge is delivered unnotched to allow for a perfect adaptation of the string course to your instrument

Tillgänglig sedan Oktober 2011
Artikelnummer 270552
försäljningsenhet 1 Styck
Colour Nickel
Design ABR
Single Rider Yes
String Holder No
1 055 kr
inklusive moms, 99 kr frakt tillkommer
I lager om 9-12 veckor
I lager om 9-12 veckor

Denna artikel förväntas i lager inom kort och kommer då att skickas ut omgående.

Information om leveransen
1

39 Kundbetyg

4.8 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

25 Recensioner

J
Worthy upgrade
JoeyC 10.04.2024
I bought this as an upgrade for a Gibson Les Paul R8 custom shop. The original ABR-1 bridge rattles and the saddles move very easily when changing strings etc. That was the main reason I wanted to change the bridge. Little did I know what the overall improvement of the instrument would be. The guitar sings, intonates much better and has sustain for days. Couldn't be happier. The saddles need to be notched which was easy to do with a small V-shaped file and following the instructions on ABM's website.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
L
Great improvement over Gibson's ABR bridges / stop tails.
Lefthandjoe 30.04.2013
I went for a ABM stop tail combined with this bridge, both in bell brass. I wanted better string separation and more sustain. And boy do they deliver. If you are unsure what combination of Bell Brass and Alu is right for you/your guitar, you can give ABM a call, they will give you great advise too.
I installed them on my ES 335 Fat neck (everything fitted perfectly, not drilling required)
The only thing to consider is that the saddles are NOT notched, so you will have to do that yourself or have your luthier do it for you.
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
S
sustain in the brain
SMario251 19.01.2024
massive amount of sustain after installation on a 61 SG... really worth getting... I have the equivalent for my LP, and stop tails for both
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
J
great choice on an ES175
Jenna 26.09.2015
My ES175 is from the run Gibson did in 2015 - the Memphis Historic ‘59. It was supplied with an all rosewood bridge, which was fine with wound G string flatwound 11s, but wouldn’t intone when A swapped to a set with a plain G string.

I preferred the plain G for blues, so I bought this bridge to get the intonation right. It did the job… but more than that, the guitar simply sounded better. On the old bridge, the low E string could inexplicably set up a weird resonance against some chords. The ABM has no such problems, and the guitar has retained all it’s tonal quality and gained a bit more “attack”. So it’s more versatile - and sounds even better now I’ve switched back to flatwounds.

I think the price is fair for the quality, tone and functionality.
hantverkskvalitet
0
1
Anmäl recension

Anmäl recension