Sommer Cable Quantum Highflex Multipair 2

195

High Qualiy Multicore Cable

  • High quality 2-pair multicore
  • Suitable for live and studio purposes as well as permanent installations
  • Completely torsion-free
  • Cold-resistant up to -30°
  • Pairs of wires insulated individually with rubber sheath
  • Cu-coil shielded with 99% coverage
  • Low capacitance of 45 pF cable/cable
  • 110 Ohm (AES/EBU), compliant over hundreds of metres
  • Cable cross-section: 0.14 mm²
  • Sheath: S-PVC
  • AWG - AWG26
  • Conductor insulation: Skin PE
  • Shielding: Cu coil, paired
  • Coverage: 99%
  • Temperature range: -30° to 70°
  • Sheath colour: Black, matte
  • Capacitance cable/cable at 1 m: 45 pF
  • Capacitance cable/shield at 1 m: 90 pF
  • Conductor resistance at 1 km: < 90 Ohm
  • Insulation resistance at 1 km: >1 GOhm
  • Characteristic impedance: 110 Ohm
  • Outer diameter: 8.5 mm
Disponível desde Dezembro 2006
número de artigo 108775
unidade de venda 1 metro(s)
Number of NF-channels 2
Screened Pair Yes
Colour Black
€ 2,60
IVA incluído, € 20 de portes de envio adicionais
Desconto de quantidade
Preço unitário Poupará Montante
€ 2,60 1
€ 2,49 4,2% 10
€ 2,39 8,1% 100
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Sexta, 19.04.
1

195 Avaliações de clientes

4.8 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

71 Críticas

M
Incrivel
Metralha 20.02.2024
Incrivelmente flexível e de fácil soldadibilidade!!! Os cabos internos parecem feitos para aguentar porrada!!! A ver se não me enganam
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Good multicore - a little overkill with 2 lines
Stephan7664 18.02.2014
This multicore cable is very flexible, has a thick, hard to cut but very soft outer jacket, and nice wires inside. It is, however a little big for a cable carrying two signals, as there are two fibre-fillers each as big as a sub-cable. The 4-pair version of this cable is just as thick. The wires besides the big outer jacket are easily stripped (I use a professional Stripax automatic wirestripper) and soldered.

My use of this cable was to connect a preamp to my DSLR Camera. The cable barely fit into a 5-pin XLR connector with the help of some tools to cut oof parts of the strain-relief inside the connector. I used an Amphenol 5 pin XLR, which is like the Neutrik XX series, but cheaper. For this cable, it was a mistake since the Amphenol's plastic for the strain relief is hard and brittle, and it was easy to break of too much. Neutricks strain relief is softer and not brittle at all, so next time I will spend the extra cash.

Mounting on the other side was using an industrial strain relief. For this cable you should use a trumpet, as the screw0type strain reliefs can create a sharp bend in this cable.
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
JS
Awesome cable!
Johan SpinOff 28.12.2019
Very good cable for on-stage use! I love to have a couple of 2-pair and 4-pair XLR cables around for feeding in-ear monitors, going from the DI's of the keyboard to the stage block, ... It drastically reduces the amount of separate cables on the stage. It just looks neater, works faster, ...

Pros: Good quality, Easy to solder

Cons (sort off...): It's rather expensive, but totally worth it!
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
B
Good for Studio Applications, Maybe not so much for Live Applications
BlackSpire 26.10.2021
I use the cable for custom length stereo audio connections in my studio.
The two cores are extremly well padded and will resist people walking over it pretty well (I still wouldn't recommend running it through a walk way).
While it might be overly thick and a bit expensive, I like buying cables that last for a life time, which this cable does so far.
Thanks to the padding, this cable will also last long in a live setup, but due to its thickness it can get cumbersome to handle at certain lengths.
Also there is something to be said for not using expensive cables in live setups, since event the best cables won't survive an idiot tying a knot in it.

Note: be careful when removing the outermost coating layer as the next layer is the individual core coating, which you don't want to cut open.
The individually coated cores are thick enough to work with the strain releave of neutrik connectors.
acabamento
2
0
Reportar a crítica

Reportar a crítica