Thomann Case Behringer Xenyx 2222

239

Suitcase for Mixer

  • Fitting for Behringer XENYX 2222/USB
  • Exterior dimensions: approx. 530 x 620 x 140 mm
  • Colour: Black
Produkt dostępny od Październik 2011
Numer artykułu 267780
Jednostka sprzedaży 1 szt.
made for Behringer
Type Case
Material PVC/Aluminium
Wheels No
Dockhouse No
Colour Black/Alu
External Width 530 mm
External Depth 620 mm
External Height 140 mm
Pokaż więcej
338 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

239 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

106 Opinie

Ł
Case na mikser behringer
Ł.S. 02.04.2020
Case wykonany z porządnych materiałów.
Używam do miksera behringer.
Mikser pasuje idealnie. Jest miejsce na dodatkowe kable czy akcesoria.
Bardzo dobra ochrona miksera podczas transportu, ale można również używać go nie wyjmując z case.
Polecam
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

C
Jak to Case - przyjmuje ciosy
Canonier 28.02.2023
Pasuje do miksera i dodatkowo po bokach jest miejsce na 2 x mikrofon i kabelki.
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Not as visualised
Alan5049 03.10.2014
This product is of good quality, Thomann Mix Case 5362E was purchased as a bundle with the Behringer Xenyx X2222 USB. The online picture is deceiving in its perspective the case is massive.

That said the top wont shut without pressing the desk well into the foam lid - a concern on this desk as it has a press knob to select the effects settings, whether the constant pressure whilst in the case on this particular knob would eventually cause a failure may be a possibility.

I have purchased quite a selection of equipment from Thomann and on the whole all have been of great value and quality, this product is also in that framework it is just too large.

I will be returning the product - it is almost twice the depth of the mixing desk.

If you wanted to store microphones and leads in the bottom then thats fine. I have other cases for that purpose. A photograph showing the mixing desk in situ would have avoided any confusion.
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
Pretty good.
Lahm 17.05.2017
Not a bad budget case for protection though I ordered this with a Xenyx X222 Behringer desk thinking it would fit like a dream and I found the case much larger than needed for the size of the desk and the padding seemed to be glued in at the factory and not very neatly. The foam was installed so that the desk is positioned near the top (by the carry handle) which makes it top heavy when standing up. This means it wobbles when placed quickly by band mates and falls over when placed on a slight incline/gradient such as a hill or angled pavement.
1
0
Zgłoś nadużycie

Zgłoś nadużycie