K&M 14300 Tenor/ Alto Sax Stand

1007

Stojak do saksofonu

  • Odpowiedni dla saksofonów altowych i tenorowych
  • Cokół wzmocniony włóknem szklanym ze składanymi nogami
  • Wszystkie uchwyty na instrument są w całości pokryte powłoką ochronną z tworzywa sztucznego
  • Elastyczne ramię dopasowuje się do różnej wielkości dzwonów
  • Dolny uchwyt umożliwia przestawianie i blokowanie różnych pozycji
  • Poprzez uchwyt stożkowy stojak może zostać wyposażony w stożek do klarnetu
  • Dodatkowy adapter umożliwia również umocowanie stożka do trąbki, flugelhornu, lub saksofonu sopranowego
  • Waga: 1,0 kg
  • Wysokość: 375 mm
  • Kolor: czarny
  • Pasująca torba art. 263911 (nie jest w zawarta w dostawie)
Numer artykułu 101916
Jednostka sprzedaży 1 szt.
Instrument Alto/Tenor Saxophone
95 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 24.05.
1

1007 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

378 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
e
Superb quality for a low-height stand
etc-etc 20.05.2019
Sturdy, well designed and thought out item. Unlike the DS730B Hercules stand, in K&M 14300 the bottom C-shaped support yoke does NOT interfere with the C/C# pad cup for an alto saxophone which could get bent if contacting the yoke. Another advantage of the K&M stand is that both lower and upper support yokes do not needlessly tilt up, down or sideways. The result is that placing an alto saxophone on the K&M 14300 stand, one needs to exercise much less caution than for Hercules DS730B.

The only point of caution for K&M 14300 is that the center piece (that joins three legs) and the matching end of the tube are both keyed. However, it is still possible to assemble the stand with the tube missing the keyed position, causing a pure friction fit which leads to rotation of the tube in the center piece. In assembly, one should note the keying and match the concave notch on the tube with the convex notch on the center piece.
stabilność
montaż
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
Does the job!
LooneyLoo 06.09.2019
I just wanted a low budget stand for my sax and stumbled upon this one and thought I'd give a go. I feels quite sturdy and does what it's supposed to do. So far so good!
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Necessary but bulky
Toby1978 07.10.2022
Saxes are pretty fragile, so having a stand to set the instrument down is essential. My only complaint is that I wish it was designed so it would fit in the case with the sax so I could take it places easier.
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
f
not for tenor
fannt 31.10.2021
not really stable with the tenor and the part that goes to the _tumb holder_ is always falling off,
really scared to damage my instrument with this stand, what a waste of 30 bucks
stabilność
montaż
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie