Roadworx 4120B

27

Keyboard Stand

  • For 4 keyboards
  • 4 Support levels freely adjustable in height and inclination
  • With hand wheels
  • Interior width: 120 cm
  • Holder length: 69.5 cm (level 1), 45 cm (levels 2, 3 and 4)
  • Max. load capacity: 10 kg
  • Max. load capacity on lowest level: 35 kg
  • Total height: 139 cm
  • Weight: 16 kg
  • Colour: Black
Leverbaar sinds Februari 2023
artikelnummer 547968
verkoopseenheid 1 stuk
Keyboard Supports 4
B-Stock vanaf € 119 beschikbaar
€ 129
Gratis verzending en incl. btw.
direct leverbaar
direct leverbaar

Dit product is op voorraad en kan direct verzonden worden.

Informatie over de verzending
Verwachte verzenddatum: Woensdag, 8.05.
1

27 Klantenbeoordelingen

4.5 / 5

U moet ingelogd zijn om producten te evalueren.

Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.

Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.

hanteerbaarheid

stabiliteit

afwerking

20 Recensies

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
C
Great
Cadian 17.11.2023
Very sturdy stand lots of space for synths, only issue is the brackets that come with it cannot be taken off without dismantling. However the jaspers brackets fit perfectly and they can be put on without disassembling. I found it easy to build but the instructions could be much better. For the price point definitely 5 stars
stabiliteit
afwerking
hanteerbaarheid
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
l
Excellent
lhckr 28.02.2023
This stand is a godsend for the price and the quality construction, fairly easy to mount and very stable at full load. It finally consolidated my setup in one place.
stabiliteit
afwerking
hanteerbaarheid
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
M
Not stable at all. Very little adjustment.
Martin9392 08.01.2024
Complex to set up and has a tendency to rotate under the slightest pressure. I have a M Audio Keystation 88 which barely fits widthways. A Korg Krome a Roland Gaia and a Modal Cobalt8X. The latter is relatively heavy and has a curved front to the underside. The only way possible to keeep this on the Roadworx 4120B is to put velcro strips on the supports and under the keyboard. otherwise it slips off immediately. That in itself is more of an issue with the Modal but this stand won't hold it without assistance.

Secondly I can put this on and tighten the 4 wheels for this row. (2 on the bar and 2 on the supports) as tight as I can and I have strong hands and in 10 minutes the Modal will be pointing downwards. The poles and supports may be strong in themselves but the brackets are next to useless.

Finally you cannot set this and reach synth controls. One of the sets of support is much longer. however 80% of that length goes back behind the pole. In fact the front part of this pair of supports is shorter than the others. Unfortunately you have to use this on the bottom rung as it is too deep to go anywhere else unless you want two metal rods sticking into your wall.

I found a half solution and that was to invert the long poles so they stick a long way forward and use velcro to hold on my keystation. Its not a deep keyboard but just too wide to fit between the poles on the normal brackets. The downside to this is with all the weight forward - the inadequate brackets let it constantly tilt forward especially if I play above pianissimo.

If you have a selection of small light keyboards - this would do the job (maybe). if you have anything substantial - look elsewhere.
stabiliteit
afwerking
hanteerbaarheid
1
0
Evaluatie melden

Evaluatie melden