Monacor MZF-8631

94

Monacor MZF-8631 Speaker Lattices

  • Maat: diameter 12 "
  • Klassieke vorm met vierkante gaten en rubberen omranding
  • Zwart gelakt
  • Door klemmen te bevestigen
  • Met een hoge stabiliteit in alle soorten en maten
Leverbaar sinds April 2005
artikelnummer 180098
verkoopseenheid 1 stuk
Electronic Accessories No
Cabinet Accessories Yes
Stand a. Flying Stud Accessories No
€ 14,90
Incl. btw plus € 5,90 verzending
direct leverbaar
direct leverbaar

Dit product is op voorraad en kan direct verzonden worden.

Informatie over de verzending
Levering ongeveer tussen Donderdag, 2.05. en Vrijdag, 3.05.
1

94 Klantenbeoordelingen

4.6 / 5

U moet ingelogd zijn om producten te evalueren.

Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.

Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.

afwerking

36 Recensies

O
Good one
OrbitalBassManouvers 28.08.2018
Just as described, and good value for money
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
T
A quick solution to speaker protection if you build your own cabinets.
Tony4843 11.06.2015
In combination with a speaker clamp kit (such as Thomann 103483), the Monacor loudspeaker cover provides a very quick and effective means of mounting and protecting loudspeakers in a home-made cabinet (as in my case) or perhaps to repair a commercially-made cabinet. The Monocor product is light but strongly made and I am confident that it will protect my speakers from impact with other equipment when loading and transporting my gear. This type of cover has been on the market for some decades. It was about 30 years ago that I bought my first and I've used several since. Over the years, I have never lost a speaker as a result of physical impact with other gear. It is possible that a sharp object, such as a screwdriver, could penetrate the cover and damage the loudspeaker and a finer steel mesh might be an improvement,,,,but I suspect that this would increase the weight and price of the cover.
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
P
Good general purpose speaker grill
Pete-plays-guitar 12.04.2017
I bought this to protect the speaker cone under the front covering due to the kids running around the house. For the price it is OK, the rubber surround could be glued on a bit better as when tightening the grill / speaker clamps, the rubber slipped off the metal.

I am glad it is hidden under the grill cloth, but if it is not for show and just practicality then it is fine.
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
MS
Cheap, works. Need to say more?
Matyas S. 23.06.2019
Affordable solution to protect your 12" speakers. Tried them on 4-5 different 12" ones, worked with all of them. Not bulletproof, but tough enough against dings and stuff. Buy it, not gonna regret the purchase.
afwerking
0
0
Evaluatie melden

Evaluatie melden