String Swing CC01K Guitar Wall Hanger ASH

8

Guitar Wall Holder

  • Mounting plate made of ash
  • Deep bracket design that prevents the guitar from being improperly inserted into the bracket
  • The guitar must be lifted approx. 5 cm to be removed
  • Non-symmetrical bass, electric and acoustic guitar headstocks are perfectly held and still hang straight
  • Suitable for neck widths up to 47.5 mm
  • Suitable for all nitro finishes except white
  • Made in USA

Note: Nitrocellulose lacquer finishes may show streak-like pressure marks even without a chemical reaction when pressed for long periods of time. We recommend a suitable case or gig bag for longer storage.

Myynnissä vuodesta Toukokuu 2021
Tuotenumero 518959
Myyntierä 1 kappaletta
Material Wood, Metal, Rubber
Type Wall Mount Bracket
Suitable For: Acoustic Guitar, Electric Bass, Electric Guitar
For Guitars With Pyroxylin Varnish Yes
18,90 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu lähetyspäivä Perjantai, 10.05. mennessä
1

8 Asiakkaiden arviot

4 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Vakaus

Työnjälki

7 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
GB
Sticky plastic that rips off
Grumpy Bassman 01.03.2024
I got several of those as I thought, it's the best wall hanger. Made in US, highly reputable, etc.

When I took the first out of the box, I was surprised, the hanging surface was covered in sticky plastic that peels off. I rub my finger and it's now covered in plastic that seems to be cleanable, but nevertheless. I didn't try this hanger my instruments with beautiful unfinished necks and decided to try a laquer-finished neck first. Yeah, it hangs, but when I take the guitar off, I need to clean it, as it takes the dissolving plastic from the hanger.

I decided not to risk my instruments and didn't install those hangers.

Another thing a buyer needs to be aware of that the hook is really narrow, so you need to be very careful while hanging an instrument. When I'm dropping the instrument without looking much (like I do on Gator or K&M), this doesn't work and I hit the hook with the neck, as the hook is much narrower. It's barely enough to tightly fit my 6-string guitar with a 43mm nut, a wider neck on an extended range bass might be a total no-go.
Työnjälki
Vakaus
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
T
Tedddd 10.11.2022
Best feckin hanger I have
Työnjälki
Vakaus
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
MK
Ewas schöner als "Plastik" - ein paar unbedeutende Schwächen
Martin K. 15.12.2021
Suchte mal was anderes als die schwarzen Wall hanger-
-sollte ausserdem Nitro Lack beschichtete Gitarren nicht angreifen
-die String Swing sehen gut aus, haben angeblich ein Gummi, das Nitro nicht angreift
-Verarbeitung schön, sieht deutlich besser als der Standard aus.
-Hat doch einige Teile, insbesondere der O Ring ist wohl kein Langzeit Teil, das bleibt abzuwarten. Soll wohl die Torsion der Gabel ermöglichen. Hier wäre ein Kunststoff Ring aus Nylon besser gewesen. kein Verschleiss.
-Schwäche ist die Verschraubung der Gabel, hier dreht man, falls die Wand "schön" ist, ohne es zu wissen die Halte Schraube der Gabel durch das Holzstück eventuell zu weit und die bohrt sich dann etwas in die Wand. Unschön, wenn das Ding jemals wieder abmontiert würde.
-das mit dem ungewollten durchschauben stört mich, deswegen ein Punkt Abzug. Statt dem Kunststoff Distanz Stück hätte man ein massives Holzstück nehmen können mit einer Präzisonsbohrung, ist wohl bei der Herstellung zu teuer. Wäre aber "etwas schicker und noch Umwelt schonender , haha....."
-Verpackung etwas zu viel Kunststoff, Teile fallen einem entgegen nach dem Öffnen. Schachtel hätte doch gereicht. Aus Pappe natürlich.
Työnjälki
Vakaus
3
1
Raportoi ongelmasta

Raportoi ongelmasta

google translate fr
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
R
Bon produit
Richy14 16.08.2021
Solide, efficace (tient bien au mur pour le moment), polissage perfectible sur les arêtes.
Työnjälki
Vakaus
0
0
Raportoi ongelmasta

Raportoi ongelmasta

Liittyvät YouTubesta