Multi-Effect Pedal for Microphones
- XLR microphone preamplifier for dynamic microphones with gain and pad switch
- 2 Foot-switchable multi-effects units
- Unit 1: 2 reverbs, short delay, phaser, lower and upper octaves
- Unit 2: 2 additional reverbs, long delay, flanger & rotary, FX loop
- Low pass filter
- Switchable saturation range
- True bypass
- 2 Expression pedal inputs
- Controls: 2x CTR1, 2x CTR2, Blend, 2x Mix, Volume, Tone, 2x FX Select, Mic Level
- Switch: Output Select, Pad
- LED: Effect A on, Effect B on, Saturation on
- Foot switch: Effect A Bypass, Effect B Bypass, Saturation Bypass
- Current consumption: 210 mA
- Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)
- Dimensions (W x D x H): 113 x 142 x 59 mm
- Weight: 490 g
- Handmade in USA
Note: Battery operation is not supported.
Connections:
- Input: Comboi socket 6.3 mm jack / XLR
- Outputs: XLR and 6.3 mm jack
- EXP A: 6.3 mm jack
- EXP B: 6.3 mm jack
- Send: 6.3 mm jack
- Return: 6.3 mm jack
- Expression A input: 6.3 mm stereo jack
- Expression B input: 6.3 mm stereo jack
- Power connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
Myynnissä vuodesta
Marraskuu 2019
Tuotenumero
479016
Myyntierä
1 kappaletta
Näitä ostavat asiakkaat, jotka ovat tutkineet tätä tuotetta.
Lisävarusteet ja yhteensopivat tuotteet
Liittyvät YouTubesta
Vertaile vaihtoehtoa
Viimeksi katsotut tuotteet
Etusi
© 1996–2024 Thomann GmbH.
Thomann loves you, because you rock!
