Shure XLR Socket for SM58

Start 360°

Vis oversættelse

XLR Socket

With screw (left-hand thread)
For SM58, Beta SM 58, SM57 (90C1984)

30 30 dages-Money Back garanti

Fås siden Marts 2006

Artikelnummer 191393

salgsenhed 1 stk

Type of replacement part Socket

42 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr

Forventet levering mellem tirsdag, 7.05. og onsdag, 8.05.

Salgsrang

i Reservedele til mikrofoner

Kunder som så på dette produkt købte dette

the t.bone SM58 Replacement Screen Silver

75 kr

købt

Shure Replacement Ring f. Beta 58/87

15,60 kr

købt

the t.bone SM58 Replacement Screen Black

77 kr

88 Kundebedømmelser

5 71 Kunder 4 13 Kunder 3 3 Kunder 2 0 Kunder 1 1 Kunde

4.7 / 5

forarbejdning

Retningslinjer for anmeldelser

46 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Quality replacement XLR socket

Anonym 25.11.2015

This fits straight into an SM58 and I've been able to re use 2 old mics that would otherwise have needed donor mics for new pins as nobody seems to sell these anywhere, including Shure UK! They said that due to the amount of fakes around they do not sell this part, which sounds ridiculous when the rest of the mic is bombproof and designed to last for a lifetime. In fact one of the 58's I fixed had the old style wiring meaning it was made before 1981 and it sounds just as good as a brand new one. So why would Shure not sell the replacement for one of the only parts that may wear out or get broke. Anyway, no matter now, Thomann to to the rescue. I searched all over the UK and can guarantee nowhere else sells these. They are very easy to fit, you just need to solder 2 wires on the rear of the pins, which is a little fiddly but the solder seems to flow well into the recess. Then just push in, the slot and groove let you only put it in one way, just push it far enough for the hole to line up with the hole in the mic, then tighten the grub screw.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

essential Shure Spare part

Anonym 23.08.2016

Used to restore old SM58 mics. much easier than trying. to re solder old sockets, cheap to buy. fit perfectly. sorted.

All we need now is to stop singers whirling the mic around above their heads by the leads when it's not their kit!

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Reliable

PCasey 21.03.2022

Reliable shure connector, simple.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Socket not only for SM58

Antipinoff 03.03.2018

Original socket. Suitable almost for all Beta (57 and 58 100%),
SM 48/57/58 and maybe for lots of hand microphomes of Shure. Maybe not only for Shure.

Ideal connection, no backlash.

Anmeld bedømmelse

Læs alle anmeldelser

Shure XLR Socket for SM58

XLR Socket

Kunder som så på dette produkt købte dette

88 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

46 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Shure XLR Socket for SM58

XLR Socket

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

88 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

46 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator