Mojotone T 4-Way Solderless Harness

Start 360°

Vis oversættelse

Electronics Replacement Set for Electric Guitar

For T-Style models
Hand-wired electronics kit with highest quality components, providing a significant improvement over standard electronics
Solderless plug-in wire connector for quick installation and easy pickup changing
Switch positions: 1: bridge, 2: bridge and neck (parallel = standard), 3: neck, 4: neck and bridge (serial = fat humbucker tone)
Made in USA

Delivery contents:

Volume control: 1x CTS 250 kOhm, Vintage Audio Taper (30%).
Tone control: 1x CTS 250 kOhm, Vintage Audio Taper (30%)
Thread length: 9.5 mm
Smooth axle (solid shaft)
1 .047µF capacitor
1 Oak Grigsby 4-Way lever switch
1 Switchcraft 1/4" mono jack socket

Note: The 4-way modification requires a separate wire from the cover of the neck pickup (if it has a cover) to the shield; if you do not have this wire, you can cut off the connection between the cover and the eyelet and solder a separate wire to the cover.

Fås siden Januar 2023

Artikelnummer 556711

salgsenhed 1 stk

Design Normal

Resistance Value 250 kOhms

Characteristic Curve Logarithmic

Thread Length 9,5 mm

Tandem Poti No

Push/Push No

Solderless Yes

shaft type Smooth

Type Switcher

Colour Silver

Vis mere